Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set
Wheeler Engineering has created a fantastic screwdriver set painstakingly designed to meet the needs of all your gun projects, and at a price that is affordable for everyone. This deluxe screwdriver set has just about every bit needed to work on any gun including specialty tools to help with disassembly and hollow ground flat bits specifically designed to match the thin slots in gun screws.
Contents:
Hinged storage box
2 handles
3" shaft extension
Hex to square drive adapter (allows using the bits with a 1/4 drive socket wrench - wrench is not included)
54 flat bits
8 Allen bits, sizes ranging from 1/16" to 3/16"
4 Phillips bits, #0, #1, #2, #3
3 Torx bits, T10, T15, T20
Note: includes two each of the very thinnest bits in this set, this is intentional as the thinnest are most likely to break
Also includes 15 specialty bits:
Weaver/Ruger scope ring clamp bit
Redfield windage screw bit
Leupold windage screw bit
Mauser stock cross bolt bit
Millett rear sight adjustment bit
1911 grip screw bushing driver
Ruger/Colt single action base pin latch nut bit
M1/M14/M1A rear sight bit
.062" pin punch
.093" pin punch
.118" pin punch
Remington 870/1100/1187 trigger plate pin punch
2" #2 Phillips
Glock replacement front sight screw bit
S&W rebound spring compressor tool
Note on bits:
The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be
considered a defect, rather it means that the fastener will require some other means of removal or an application of a
suitable compound that will penetrate threads, such as Kano Kroil. Replacement bit product numbers may be found in this Wheeler Bit Chart.
The following could be substituted for this product:
